SAB1013 Rubber Outer Torsion Bush
This bush type is designed for use where a machined housing is available and hence no outer tube is provided. An interference fit provides the required pre-compression.
This construction is intended for only light axial loads unless the outer rubber bonded into position.
Dimensions (in mm) are:
- Bore diameter (A): 11.2 +0.09 / -0.04
- Bore length (B): 63.6 +0.03 / -0.23
- Outer diameter (C): 41.3 +0.10 / -0.41
This bush is used on:
- Triumph cars: 200 Range, Stag and TR6. Rear spring bush
The image is of a generic Rubber Outer Torsion bush