SAB1071 Rubber Outer Torsion Bush

£4.09

This bush type is designed for use where a machined housing is available and hence no outer tube is provided.  An interference fit provides the required pre-compression. 

This construction is intended for only light axial loads unless the outer rubber bonded into position.

Dimensions (in mm) are:

  • Bore diameter (A): 11.3 +0.00 / -0.12
  • Bore length (B): 38.9  +0.09 / -0.16
  • Outer diameter (C): 23.5 +0.07 / -0.18

This bush is used on:

  • Triumph cars. Believed to be for the 200 Range, Stag & TR6.  Original part number 119450
  • Armstrong cars: Unknown vehicles.  Original part number: AT7/5033

The image is of a generic Rubber Outer Torsion bush