Product Information
Description
The AAD mount is for light loads and is used specifically for the protection and vibration isolation of small, low-weight equipment such as technical instruments, small electrical switchboards and electronic components. It is used regularly in Rail.
Whilst loading should be in compression, the mount will work with vibrations in all directions
The failsafe design prevents detachment of the mounted appliance even if the elastomers should become completely destroyed (excl. fires). The sheltered design also provides protection for the elastomer contributing to extended service life.
Materials:
- Rubber: Blended elastomer.
- Metals: Aluminium, on request this can have a galvanic treatment in compliance with MIL STD 202, method 101. This increases corrosion resistance.
Note:
- This product is typically on a 3-week lead time but in holiday seasons this grows to circa 6 weeks.
- daN (deca Newtons) is equivalent to 1.019kg static at sea level.
- The below data is designed as a guide
| Model | Load Rating (daN) | Deflection (mm) | Spring Rate (daN/mm) | Natural Frequency (Hz) |
| Ped-V-AAD-20-AS | 1 - 5 | 0.1 - 0.9 | 5 | 51 - 17 |
| Ped-V-AAD-20-N | 5 - 10 | 0.6 - 1.5 | 5.6 | 21 - 13.5 |
