Product Information
Description
AVMR's Premium Cylindrical Rubber Bobbin mounts are made at our factory in the UK, using tight tolerance materials. We can offer bespoke versions of these products and conduct 100% quality checks if required.
Whilst a waisted rubber bobbin mount can provide greater levels of deflection, smaller waisted mounts are difficult to Engineer for consistency. Therefore, our smaller premium bobbins are cylindrical.
In the datasheet for these products there is advice on using bobbins.
These bobbins mounts use a Natural Rubber base compound along with plated mild steel metals. The plating is either standard zinc or sherardize.
| Product | Rubber Hardness | H (mm) | D (mm) | L (mm) | Thread | Min Compressive Load (Kg) | Max Compressive Load (Kg) |
| Bob-0808-MM | 1 | 8 | 8 | 6 | M3 | 0.3 | 0.7 |
| Bob-0808-MM | 2 | 8 | 8 | 6 | M3 | 0.5 | 1.2 |
| Bob-0808-MM | 3 | 8 | 8 | 6 | M3 | 1 | 3 |
| Bob-0808-MM | 4 | 8 | 8 | 6 | M3 | 2.5 | 5 |
| Bob-0808-MM | 5 | 8 | 8 | 6 | M3 | 4 | 7 |
| Bob-1008-MM | 1 | 8 | 10 | 10 | M4 | 0.5 | 1 |
| Bob-1008-MM | 2 | 8 | 10 | 10 | M4 | 0.8 | 2 |
| Bob-1008-MM | 3 | 8 | 10 | 10 | M4 | 1.5 | 5.5 |
| Bob-1008-MM | 4 | 8 | 10 | 10 | M4 | 4 | 8 |
| Bob-1008-MM | 5 | 8 | 10 | 10 | M4 | 6 | 10 |
| Bob-1111-MM | 1 | 11 | 11 | 10 | M4 | 1.5 | 3 |
| Bob-1111-MM | 2 | 11 | 11 | 10 | M4 | 2 | 4 |
| Bob-1111-MM | 3 | 11 | 11 | 10 | M4 | 3 | 7.5 |
| Bob-1111-MM | 4 | 11 | 11 | 10 | M4 | 5 | 10 |
| Bob-1111-MM | 5 | 11 | 11 | 10 | M4 | 6 | 12 |
| Bob-2216-MM | 1 | 16 | 22 | 16 | M6 | 2.5 | 10 |
| Bob-2216-MM | 2 | 16 | 22 | 16 | M6 | 4 | 13 |
| Bob-2216-MM | 3 | 16 | 22 | 16 | M6 | 10 | 17 |
| Bob-2216-MM | 4 | 16 | 22 | 16 | M6 | 15 | 26 |
| Bob-2216-MM | 5 | 16 | 22 | 16 | M6 | 20 | 32 |
