Product Information
Description
Key Benefits:
- Easy to use – simply place a Piano Foot beneath each of the piano’s casters positioning the wheel is in the recess
- Reduction of structural noise through the piano feet and into the floor
- Low profile mount (circa 25mm tall) results in only a small change to the height of the keys once installed
Key features of this Vibration absorbing Piano mount:
- High strength brass body
- Low overall height
- Max piano wheel width: 62mm
- Highly effective vibration absorption due to high deflection rubber element
- RoHS & REACH compliant
- NBR Rubber base will grip the floor to prevent movement
- 4mm deep cup will hold the piano’s caster in place
Recommended Loads:
- PAD-V-TSPF-AS: 50 – 100kg/foot (typically used for an Upright Piano and Baby-Grand Pianos)
- PAD-V-TSPF-N: 100 – 300kg/foot (typically used Grand Pianos)
Absorption depends on which note is played:
- 27.5 Hz: typical lowest note on a Piano
- 256 Hz: Middle C
- 4186 Hz: typical highest note on a Piano
Loads and Absorption
| Model | Load per mount (daN) | Deflection (mm) | Natural Frequency (Hz) |
| TSPF-80-AS | 50 - 100 | 1.25 - 1.7 | 14.5 - 12.5 |
| TSPF-80-N | 100 - 300 | 1 - 2 | 16 - 11.5 |
Next Steps:
1. How much (approximately) does your Piano weigh
2. Divide this weight by the number of castors on the Piano
3a. If the weight per mount is under 100kg select the "Soft" variant
3b. If the weight per mount is over 100kg select the "medium" variant
4. Select the number of feet you require based on the number of castors
5. Continue the purchase process.
6. NOTE: prices are excl. VAT and shipping, which will be added in the purchase process.
Lead Time
These parts are typically shipped within 3 weeks. During holiday seasons this can double.
